dmesg - First run
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-3-amd64 (Debian 3.2.21-3) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP Thu Jun 28 09:07:26 UTC 2012
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ffc0000 (usable)
BIOS-e820: 000000003ffc0000 - 000000003ffce000 (ACPI data)
BIOS-e820: 000000003ffce000 - 000000003fff0000 (ACPI NVS)
BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
DMI 2.3 present.
DMI: / , BIOS 080012 08/13/2007
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
AGP bridge at 00:00:00
Aperture from AGP @ f0000000 old size 32 MB
Aperture from AGP @ f0000000 size 64 MB (APSIZE f30)
last_pfn = 0x3ffc0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask FFC0000000 write-back
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [ffff8800000ff780] ff780
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff88000009a000] 9a000 size 20480
init_memory_mapping: 0000000000000000-000000003ffc0000
0000000000 - 003fe00000 page 2M
003fe00000 - 003ffc0000 page 4k
kernel direct mapping tables up to 3ffc0000 @ 1fffd000-20000000
RAMDISK: 36b92000 - 375c1000
ACPI: RSDP 00000000000f9530 00014 (v00 ACPIAM)
ACPI: RSDT 000000003ffc0000 00034 (v01 A M I OEMRSDT 08000713 MSFT 00000097)
ACPI: FACP 000000003ffc0200 00084 (v02 A M I OEMFACP 08000713 MSFT 00000097)
ACPI: DSDT 000000003ffc0430 0477C (v01 A32G A32GV11C 00000000 INTL 02002026)
ACPI: FACS 000000003ffce000 00040
ACPI: APIC 000000003ffc0390 0005C (v01 A M I OEMAPIC 08000713 MSFT 00000097)
ACPI: MCFG 000000003ffc03f0 0003C (v01 A M I OEMMCFG 08000713 MSFT 00000097)
ACPI: OEMB 000000003ffce040 00047 (v01 A M I AMI_OEM 08000713 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at 0000000000000000-000000003ffc0000
Initmem setup node 0 0000000000000000-000000003ffc0000
NODE_DATA [000000003ffbb000 - 000000003ffbffff]
[ffffea0000000000-ffffea0000dfffff] PMD -> [ffff88003e600000-ffff88003f3fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal empty
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0003ffc0
On node 0 totalpages: 261967
DMA zone: 56 pages used for memmap
DMA zone: 5 pages reserved
DMA zone: 3922 pages, LIFO batch:0
DMA32 zone: 3528 pages used for memmap
DMA32 zone: 254456 pages, LIFO batch:31
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 20, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 1 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
Allocating PCI resources starting at 40000000 (gap: 40000000:bf780000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88003fc00000 s82816 r8192 d23680 u1048576
pcpu-alloc: s82816 r8192 d23680 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 258378
Policy zone: DMA32
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
AGP bridge at 00:00:00
Aperture from AGP @ f0000000 old size 32 MB
Aperture from AGP @ f0000000 size 64 MB (APSIZE f30)
Node 0: aperture @ f0000000 size 32 MB
Aperture too small (32 MB) than (64 MB)
Memory: 1014364k/1048320k available (3409k kernel code, 452k absent, 33504k reserved, 3324k data, 572k init)
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:33024 nr_irqs:512 16
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 2200.011 MHz processor.
Marking TSC unstable due to TSCs unsynchronized
Calibrating delay loop (skipped), value calculated using timer frequency.. 4400.02 BogoMIPS (lpj=8800044)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
tseg: 0000000000
mce: CPU supports 5 MCE banks
SMP alternatives: switching to UP code
ACPI: Core revision 20110623
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Athlon(tm) 64 Processor 3200+ stepping 02
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 1 CPUs
Total of 1 processors activated (4400.02 BogoMIPS).
devtmpfs: initialized
PM: Registering ACPI NVS region at 3ffce000 (139264 bytes)
print_constraints: dummy:
NET: Registered protocol family 16
node 0 link 0: io port [1000, ffffff]
TOM: 0000000040000000 aka 1024M
node 0 link 0: mmio [e0000000, efffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [40000000, ffffffff]
bus: [00, ff] on node 0 link 0
bus: 00 index 0 [io 0x0000-0xffff]
bus: 00 index 1 [mem 0x40000000-0xfcffffffff]
bus: 00 index 2 [mem 0x000a0000-0x000bffff]
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI Error: Invalid type (Method) for target of Scope operator [PCI0] (Cannot override) (20110623/dswload2-241)
ACPI Exception: AE_AML_OPERAND_TYPE, During name lookup/catalog (20110623/psloop-231)
ACPI Error: Method parse/execution failed [\_SB_.PCI0] (Node ffff88003e1df448), AE_AML_OPERAND_TYPE (20110623/psparse-536)
ACPI: Executed 3 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
ACPI: No dock devices found.
HEST: Table not found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xffffffff] (ignored)
pci 0000:00:00.0: [1039:0761] type 0 class 0x000600
pci 0000:00:00.0: reg 10: [mem 0xf0000000-0xf3ffffff]
pci 0000:00:01.0: [1039:0004] type 1 class 0x000604
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:02.0: [1039:0965] type 0 class 0x000601
pci 0000:00:02.5: [1039:5513] type 0 class 0x000101
pci 0000:00:02.5: reg 10: [io 0x01f0-0x01f7]
pci 0000:00:02.5: reg 14: [io 0x03f4-0x03f7]
pci 0000:00:02.5: reg 18: [io 0x0170-0x0177]
pci 0000:00:02.5: reg 1c: [io 0x0374-0x0377]
pci 0000:00:02.5: reg 20: [io 0xffa0-0xffaf]
pci 0000:00:02.5: PME# supported from D3cold
pci 0000:00:02.5: PME# disabled
pci 0000:00:02.7: [1039:7012] type 0 class 0x000401
pci 0000:00:02.7: reg 10: [io 0xd800-0xd8ff]
pci 0000:00:02.7: reg 14: [io 0xd400-0xd47f]
pci 0000:00:02.7: supports D1 D2
pci 0000:00:02.7: PME# supported from D3hot D3cold
pci 0000:00:02.7: PME# disabled
pci 0000:00:03.0: [1039:7001] type 0 class 0x000c03
pci 0000:00:03.0: reg 10: [mem 0xfeaff000-0xfeafffff]
pci 0000:00:03.1: [1039:7001] type 0 class 0x000c03
pci 0000:00:03.1: reg 10: [mem 0xfeafe000-0xfeafefff]
pci 0000:00:03.2: [1039:7001] type 0 class 0x000c03
pci 0000:00:03.2: reg 10: [mem 0xfeafd000-0xfeafdfff]
pci 0000:00:03.3: [1039:7002] type 0 class 0x000c03
pci 0000:00:03.3: reg 10: [mem 0xfeafc000-0xfeafcfff]
pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
pci 0000:00:03.3: PME# disabled
pci 0000:00:04.0: [1039:0190] type 0 class 0x000200
pci 0000:00:04.0: reg 10: [mem 0xfeafbc00-0xfeafbc7f]
pci 0000:00:04.0: reg 14: [io 0xd000-0xd07f]
pci 0000:00:04.0: supports D1 D2
pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:06.0: [1039:000a] type 1 class 0x000604
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:07.0: [1039:000a] type 1 class 0x000604
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:08.0: [1039:0183] type 0 class 0x000101
pci 0000:00:08.0: reg 10: [io 0xc800-0xc807]
pci 0000:00:08.0: reg 14: [io 0xc400-0xc403]
pci 0000:00:08.0: reg 18: [io 0xc000-0xc007]
pci 0000:00:08.0: reg 1c: [io 0xb800-0xb803]
pci 0000:00:08.0: reg 20: [io 0xb400-0xb40f]
pci 0000:00:08.0: PME# supported from D3cold
pci 0000:00:08.0: PME# disabled
pci 0000:00:0a.0: [1814:0201] type 0 class 0x000280
pci 0000:00:0a.0: reg 10: [mem 0xfeaf8000-0xfeaf9fff]
pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
PCI: peer root bus 00 res updated from pci conf
pci 0000:01:00.0: [1002:954f] type 0 class 0x000300
pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xfebf0000-0xfebfffff 64bit]
pci 0000:01:00.0: reg 20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 30: [mem 0xfebc0000-0xfebdffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:aa38] type 0 class 0x000403
pci 0000:01:00.1: reg 10: [mem 0xfebec000-0xfebeffff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:06.0: PCI bridge to [bus 02-02]
pci 0000:00:07.0: PCI bridge to [bus 03-03]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 10 11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009fc00 - 000000000009ffff
reserve RAM buffer: 000000003ffc0000 - 000000003fffffff
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000d0000-0x000dffff window]
pnp 00:00: [mem 0x40000000-0xffffffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [dma 4]
pnp 00:01: [io 0x0000-0x000f]
pnp 00:01: [io 0x0081-0x0083]
pnp 00:01: [io 0x0087]
pnp 00:01: [io 0x0089-0x008b]
pnp 00:01: [io 0x008f]
pnp 00:01: [io 0x00c0-0x00df]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: [io 0x0070-0x0071]
pnp 00:02: [irq 8]
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: [io 0x0060]
pnp 00:03: [io 0x0064]
pnp 00:03: [irq 1]
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:04: [irq 12]
pnp 00:04: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
pnp 00:05: [io 0x0061]
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: [io 0x00f0-0x00ff]
pnp 00:06: [irq 13]
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:07: [io 0x03f8-0x03ff]
pnp 00:07: [irq 4]
pnp 00:07: [dma 0 disabled]
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:08: [io 0x0378-0x037f]
pnp 00:08: [io 0x0778-0x077f]
pnp 00:08: [irq 7]
pnp 00:08: [dma 3]
pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:09: [io 0x0a00-0x0a0f]
pnp 00:09: [io 0x0a10-0x0a1f]
pnp 00:09: [io 0x0a20-0x0a2f]
pnp 00:09: [io 0x0a30-0x0a3f]
system 00:09: [io 0x0a00-0x0a0f] has been reserved
system 00:09: [io 0x0a10-0x0a1f] has been reserved
system 00:09: [io 0x0a20-0x0a2f] has been reserved
system 00:09: [io 0x0a30-0x0a3f] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [io 0x0010-0x001f]
pnp 00:0a: [io 0x0022-0x003f]
pnp 00:0a: [io 0x0044-0x005f]
pnp 00:0a: [io 0x0062-0x0063]
pnp 00:0a: [io 0x0065-0x006f]
pnp 00:0a: [io 0x0072-0x007f]
pnp 00:0a: [io 0x0080]
pnp 00:0a: [io 0x0084-0x0086]
pnp 00:0a: [io 0x0088]
pnp 00:0a: [io 0x008c-0x008e]
pnp 00:0a: [io 0x0090-0x009f]
pnp 00:0a: [io 0x00a2-0x00bf]
pnp 00:0a: [io 0x00e0-0x00ef]
pnp 00:0a: [io 0x0290-0x0297]
pnp 00:0a: [io 0x0c00-0x0c05]
pnp 00:0a: [io 0x0d00-0x0d05]
pnp 00:0a: [mem 0xffb80000-0xffbfffff]
pnp 00:0a: [io 0x0480-0x048f]
pnp 00:0a: [io 0x04d0-0x04d1]
pnp 00:0a: [io 0x0800-0x08cf]
pnp 00:0a: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:0a: [io 0x08d0-0x08ff]
pnp 00:0a: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:0a: [mem 0xfff80000-0xffffffff]
pnp 00:0a: [mem 0xffee0000-0xffefffff]
system 00:0a: [io 0x0290-0x0297] has been reserved
system 00:0a: [io 0x0c00-0x0c05] has been reserved
system 00:0a: [io 0x0d00-0x0d05] has been reserved
system 00:0a: [io 0x0480-0x048f] has been reserved
system 00:0a: [io 0x04d0-0x04d1] has been reserved
system 00:0a: [io 0x0800-0x08cf] has been reserved
system 00:0a: [io 0x08d0-0x08ff] has been reserved
system 00:0a: [mem 0xffb80000-0xffbfffff] has been reserved
system 00:0a: [mem 0xfff80000-0xffffffff] has been reserved
system 00:0a: [mem 0xffee0000-0xffefffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [mem 0xfec00000-0xfec00fff]
pnp 00:0b: [mem 0xfee00000-0xfee00fff]
system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: [mem 0xe0000000-0xefffffff]
system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: [mem 0x00000000-0x0009ffff]
pnp 00:0d: [mem 0x000c0000-0x000cffff]
pnp 00:0d: [mem 0x000e0000-0x000fffff]
pnp 00:0d: [mem 0x00100000-0x3fffffff]
pnp 00:0d: [mem 0x00000000-0xffffffffffffffff disabled]
system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0d: [mem 0x00100000-0x3fffffff] could not be reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
Switching to clocksource acpi_pm
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:06.0: PCI bridge to [bus 02-02]
pci 0000:00:07.0: PCI bridge to [bus 03-03]
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:06.0: setting latency timer to 64
pci 0000:00:07.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x40000000-0xfcffffffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:03.0: PCI INT A disabled
pci 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:03.1: PCI INT B disabled
pci 0000:00:03.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
pci 0000:00:03.2: PCI INT C disabled
pci 0000:00:03.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:03.3: PCI INT D disabled
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 10428k freed
agpgart-amd64 0000:00:00.0: AGP bridge [1039/0761]
agpgart-amd64 0000:00:00.0: AGP aperture is 64M @ 0xf0000000
audit: initializing netlink socket (disabled)
type=2000 audit(1345138701.664:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 2001
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
ERST: Table is not found!
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, 114 bytes nvram
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 10
Mobile IPv6
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
rtc_cmos 00:02: setting system clock to 2012-08-16 17:38:22 UTC (1345138702)
Initializing network drop monitor service
Freeing unused kernel memory: 572k freed
Write protecting the kernel read-only data: 6144k
Freeing unused kernel memory: 668k freed
Freeing unused kernel memory: 684k freed
udevd[67]: starting version 175
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
sis190: sis190 Gigabit Ethernet driver 1.4 loaded
sis190 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
sis190 0000:00:04.0: setting latency timer to 64
sis190: 0000:00:04.0: Read MAC address from EEPROM
sis190: 0000:00:04.0: Error EEPROM read 0
sis190: 0000:00:04.0: Read MAC address from APC
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
libata version 3.00 loaded.
sis190: 0000:00:04.0: Realtek PHY RTL8201 transceiver at address 31
sis190: 0000:00:04.0: Using transceiver at address 31 as default
sis190 0000:00:04.0: eth0: 0000:00:04.0: SiS 190 PCI Fast Ethernet adapter at ffffc90000184c00 (IRQ: 19), 00:1b:b9:bc:c7:75
sis190 0000:00:04.0: eth0: GMII mode.
sis190 0000:00:04.0: eth0: Enabling Auto-negotiation
ehci_hcd 0000:00:03.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:03.3: EHCI Host Controller
ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:03.3: cache line size of 64 is not supported
ehci_hcd 0000:00:03.3: irq 23, io mem 0xfeafc000
ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.2.0-3-amd64 ehci_hcd
usb usb1: SerialNumber: 0000:00:03.3
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:03.0: irq 20, io mem 0xfeaff000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 3.2.0-3-amd64 ohci_hcd
usb usb2: SerialNumber: 0000:00:03.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:03.1: irq 21, io mem 0xfeafe000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 3.2.0-3-amd64 ohci_hcd
usb usb3: SerialNumber: 0000:00:03.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci_hcd 0000:00:03.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
ohci_hcd 0000:00:03.2: OHCI Host Controller
ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:03.2: irq 22, io mem 0xfeafd000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 3.2.0-3-amd64 ohci_hcd
usb usb4: SerialNumber: 0000:00:03.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
pata_sis 0000:00:02.5: version 0.5.2
pata_sis 0000:00:02.5: PCI INT A -> GSI 16 (level, low) -> IRQ 16
scsi0 : pata_sis
scsi1 : pata_sis
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
usb 1-1: new high-speed USB device number 2 using ehci_hcd
ata1.00: ATA-7: SAMSUNG SP1614N, TM100-24, max UDMA/100
ata1.00: 312581808 sectors, multi 16: LBA48
ata1.01: ATA-7: SAMSUNG SP2014N, VC100-41, max UDMA/100
ata1.01: 390721968 sectors, multi 16: LBA48
ata1.00: configured for UDMA/100
ata1.01: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP1614N TM10 PQ: 0 ANSI: 5
scsi 0:0:1:0: Direct-Access ATA SAMSUNG SP2014N VC10 PQ: 0 ANSI: 5
usb 1-1: New USB device found, idVendor=04f2, idProduct=a147
usb 1-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
usb 1-1: Product: USB2.0 2MP UVC Camera
usb 1-1: Manufacturer:
ata2.00: ATA-7: SAMSUNG SP2514N, VF100-33, max UDMA/100
ata2.00: 488397168 sectors, multi 16: LBA48
ata2.00: configured for UDMA/100
scsi 1:0:0:0: Direct-Access ATA SAMSUNG SP2514N VF10 PQ: 0 ANSI: 5
sata_sis 0000:00:08.0: version 1.0
sata_sis 0000:00:08.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
sata_sis 0000:00:08.0: Detected SiS 182/965L chipset
scsi2 : sata_sis
sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi3 : sata_sis
ata3: SATA max UDMA/133 cmd 0xc800 ctl 0xc400 bmdma 0xb400 irq 17
ata4: SATA max UDMA/133 cmd 0xc000 ctl 0xb800 bmdma 0xb408 irq 17
sd 1:0:0:0: [sdc] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 1:0:0:0: [sdc] Write Protect is off
sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sd 1:0:0:0: [sdc] Attached SCSI disk
sd 0:0:1:0: [sdb] 390721968 512-byte logical blocks: (200 GB/186 GiB)
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 >
sdb: sdb1 sdb2 sdb3
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:1:0: [sdb] Attached SCSI disk
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
PM: Starting manual resume from disk
PM: Hibernation image partition 8:5 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
udevd[307]: starting version 175
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
input: PC Speaker as /devices/platform/pcspkr/input/input3
parport_pc 00:08: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
EDAC MC: Ver: 2.1.0
MCE: In-kernel MCE decoding enabled.
powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ (1 cpu cores) (version 2.20.00)
powernow-k8: fid 0xe (2200 MHz), vid 0x6
powernow-k8: fid 0xc (2000 MHz), vid 0x8
powernow-k8: fid 0xa (1800 MHz), vid 0xa
powernow-k8: fid 0x2 (1000 MHz), vid 0x12
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[drm] Initialized drm 1.1.0 20060810
cfg80211: Calling CRDA to update world regulatory domain
snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
snd_hda_intel 0000:01:00.1: irq 40 for MSI/MSI-X
snd_hda_intel 0000:01:00.1: setting latency timer to 64
snd_intel8x0 0000:00:02.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
[drm] radeon kernel modesetting enabled.
intel8x0_measure_ac97_clock: measured 54863 usecs (2639 samples)
intel8x0: clocking to 48000
rt2500pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Linux media interface: v0.10
2:3:1: cannot get freq at ep 0x84
usbcore: registered new interface driver snd-usb-audio
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Registered led device: rt2500pci-phy0::radio
Registered led device: rt2500pci-phy0::quality
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device USB2.0 2MP UVC Camera (04f2:a147)
input: USB2.0 2MP UVC Camera as /devices/pci0000:00/0000:00:03.3/usb1/1-1/1-1:1.0/input/input5
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x000f0001
HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input6
radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
radeon 0000:01:00.0: setting latency timer to 64
[drm] initializing kernel modesetting (RV710 0x1002:0x954F 0x1043:0x02A8).
[drm] register mmio base: 0xFEBF0000
[drm] register mmio size: 65536
ATOM BIOS:
radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[drm] Detected VRAM RAM=512M, BAR=256M
[drm] RAM width 64bits DDR
[TTM] Zone kernel: Available graphics memory: 513358 kiB.
[TTM] Initializing pool allocator.
[drm] radeon: 512M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: irq 41 for MSI/MSI-X
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading RV710 Microcode
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
[drm] ring test succeeded in 1 usecs
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA
[drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm] Encoders:
[drm] CRT2: INTERNAL_KLDSCP_DAC2
[drm] Connector 1:
[drm] HDMI-A
[drm] HPD1
[drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY
[drm] Connector 2:
[drm] DVI-I
[drm] HPD4
[drm] DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] DFP2: INTERNAL_UNIPHY2
[drm] Internal thermal controller without fan control
[drm] radeon: power management initialized
[drm] fb mappable at 0xD0142000
[drm] vram apper at 0xD0000000
[drm] size 901120
[drm] fb depth is 24
[drm] pitch is 2560
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 80x43
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0
Adding 2104476k swap on /dev/sda5. Priority:-1 extents:1 across:2104476k
EXT4-fs (sda7): re-mounted. Opts: (null)
EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
loop: module loaded
it87: Found IT8712F chip at 0xa10, revision 8
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda8): using internal journal
EXT3-fs (sda8): mounted filesystem with ordered data mode
fuse init (API version 7.17)
kjournald starting. Commit interval 5 seconds
EXT3-fs (sdc1): using internal journal
EXT3-fs (sdc1): mounted filesystem with ordered data mode
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
ADDRCONF(NETDEV_UP): eth0: link is not ready
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team
DECnet: Routing cache hash table of 1024 buckets, 16Kbytes
NET: Registered protocol family 12
sis190 0000:00:04.0: eth0: mii ext = 0000
sis190 0000:00:04.0: eth0: mii lpa=cde1 adv=01e1 exp=0001
sis190 0000:00:04.0: eth0: link on unknown mode
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
2:3:1: cannot get freq at ep 0x84
2:3:1: cannot get freq at ep 0x84
2:3:1: cannot get freq at ep 0x84
2:3:1: cannot get freq at ep 0x84
2:3:1: cannot get freq at ep 0x84
2:3:1: cannot get freq at ep 0x84